Sarkar haɗin matsakaici na DIN764 mai walda

• Bayanin Samfurin

Ana ƙera Sarkar Haɗin Matsakaici DIN 764 bisa ga ƙa'idodin ƙasashen duniya kuma ana amfani da shi a cikin masana'antu daban-daban, yana da kyau don amfani da noma da kuma ɗaure sarkar ƙarfe. Sarkar ƙarfe mai zagaye na DIN764 na iya zama aji 2, aji 3, da aji 5. Kodayake ba a tsara shi ba kuma an ƙera shi don dalilai na ɗagawa, dole ne a daidaita shi kuma a gwada shi. Alawys sarkar DIN 764 suna zuwa da jurewa daban-daban guda biyu: Aji A, ana amfani da shi tare da ƙafafun sarka; Aji B, ana amfani da shi tare da na'urori masu juyawa. Ƙarshen sarkar DIN764 za a iya fentin shi da baƙi, an yi masa fenti da zinc, an yi masa fenti mai zafi, da sauransu.

Riba: Samfurin da ake samu (Don duba inganci), Tsarin da aka keɓance (tambarin tambari), Marufi daban-daban (jakar jute, ƙafafun filastik, ganga na ƙarfe, akwati na katako), Lokacin jagora kaɗan, Hanyar biyan kuɗi da yawa (T/T, LC, Paypal, Alipay).

• Bayani dalla-dalla:

Lambar Samfura: DIN764

• Gargaɗi:

Bai kamata a yi amfani da sarƙoƙi a cikin sarƙoƙin sarƙoƙi ba.

Kada a taɓa amfani da yawan wuce gona da iri.

• Aikace-aikace:

• Tsarin & Marufi

1:KIRKIRO: Ana buƙatar duba siffar mahaɗi da kuma lambar V a lokacin cikakken aikin. Ana buƙatar duba girma.

2: WALDA: An samar da walda ta amfani da hanyoyin juriya kuma an sanya ta a tsakiyar ƙafa ɗaya ta mahaɗin. An gama ta da kyau a ko'ina. Haɗin da walda ba za su nuna tsagewa, ƙusoshi ko wasu lahani makamancin haka waɗanda ke cutar da sarkar ba bayan an haɗa ta. Diamater na kayan da ke wurin walda bai wuce buƙatun girma ba kuma bai wuce diamita na kayan mahaɗin ba. Don sarkar walda mai santsi, za a cire fin da walda ta haifar kuma walda za ta ƙare da kyau a ko'ina. Matsayin walda a tsakiyar ganga madaidaiciya da kuma juriyar da aka sanya akan fitowar walda zai samar da izinin da ake buƙata.

3: KYAUTA: Ana buƙatar duba girma don kowane daidaitawa. Dole ne a rubuta tabbacin nauyin daidaitawa ga kowane rukuni.

4:ALAMA: Injin Daidaita Sarka. Jerin ja yana samuwa don alamar/tambari daga diamita na sarka 5mm zuwa 16mm. Farawa ɗaya maɓalli. Ɗauki tsarin sarrafawa na PCC tare da aikin tsayawa ta atomatik idan aka gamu da matsala, Tsarin ƙira mai ma'ana. Ƙara aikin ɗaukar nauyi na kai don injin don ƙara kwanciyar hankali na aiki.

Tsarin alamar iska wanda kuma zai iya yin alama akan hanyoyin haɗi guda biyu a lokaci guda.
5: MAGANIN ZAFI: An yi wa dukkan sarkar magani da zafi mai matsakaicin mita, an taurare ta daga zafin da ke sama da wurin AC3 sannan aka rage ta kafin a yi mata aiki da ƙarfin hana ƙera ta. Yanayin dakatarwa ya yi tasiri aƙalla kamar zafin 400°C da aka kiyaye na tsawon awa 1. Lokacin da aka gabatar da shawarar tabbatarwa, an gwada sarkar samfurin bayan an sake dumama su kuma an kiyaye su na tsawon awa 1 a 400°C sannan a sanyaya su zuwa zafin ɗaki. (AS 2321:2014 ta buƙaci a rage sarkar a zafin jiki aƙalla 200°C don V200 da 380°C don V400).