Nau'in Amurka mai walda G30 Proof Na'urar Sarkar Na'ura

• Bayanin Samfurin

Sarkar na'urar hana ruwa ta aji 30 nau'in sarkar haɗin da aka haɗa da kuma sarkar manufa ta gabaɗaya wacce take da ingancin kasuwanci na yau da kullun. An gina ta da ƙarancin ƙarfe mai carbon. Sarkar na'urar hana ruwa ba ta da madaidaicin siffa kuma ba ta aiki da gilashin gilashi. Ana nuna ta a kusan kowace ƙafa da alamar masana'anta da alamar maki: 3, 30 ko 300. Amfanin da aka saba amfani da shiSarkar na'ura mai hana G30sun haɗa da sarƙoƙin shinge, sarƙoƙin aminci na tirela, ginin haske, masana'antar ruwa, da sauransu. Da fatan za a lura cewa bai kamata a yi amfani da sarƙoƙin nailan mai hana G30 don aikace-aikacen ɗagawa ba. An ƙera sarƙoƙin nailan mai hana Wristrong G30 bisa ga buƙatun da ASTM ta tsara a shekarar 1980, NACM a shekarar 1990, 1996, 2003. Haka nan za mu iya samar da abubuwan ɗagawa masu dacewa don biyan buƙatunku dalla-dalla.

Riba: Samfurin da ake samu (Don duba inganci), Tsarin da aka keɓance (tambarin tambari), Marufi daban-daban (jakar jute, ƙafafun filastik, ganga na ƙarfe, akwati na katako), Lokacin jagora kaɗan, Hanyar biyan kuɗi da yawa (T/T, LC, Paypal, Alipay).

• Bayani dalla-dalla:

Lambar Samfura: Sarkar Na'urar Tabbatar da G30

• Gargaɗi:

Bai kamata a yi amfani da sarƙoƙi a cikin sarƙoƙin sarƙoƙi ba.

Kada a taɓa amfani da yawan wuce gona da iri.

• Aikace-aikace:

• Tsarin & Marufi

1:KIRKIRO: Ana buƙatar duba siffar mahaɗi da kuma lambar V a lokacin cikakken aikin. Ana buƙatar duba girma.

2: WALDA: An samar da walda ta amfani da hanyoyin juriya kuma an sanya ta a tsakiyar ƙafa ɗaya ta mahaɗin. An gama ta da kyau a ko'ina. Haɗin da walda ba za su nuna tsagewa, ƙusoshi ko wasu lahani makamancin haka waɗanda ke cutar da sarkar ba bayan an haɗa ta. Diamater na kayan da ke wurin walda bai wuce buƙatun girma ba kuma bai wuce diamita na kayan mahaɗin ba. Don sarkar walda mai santsi, za a cire fin da walda ta haifar kuma walda za ta ƙare da kyau a ko'ina. Matsayin walda a tsakiyar ganga madaidaiciya da kuma juriyar da aka sanya akan fitowar walda zai samar da izinin da ake buƙata.

3: KYAUTA: Ana buƙatar duba girma don kowane daidaitawa. Dole ne a rubuta tabbacin nauyin daidaitawa ga kowane rukuni.

4:ALAMA: Injin Daidaita Sarka. Jerin ja yana samuwa don alamar/tambari daga diamita na sarka 5mm zuwa 16mm. Farawa ɗaya maɓalli. Ɗauki tsarin sarrafawa na PCC tare da aikin tsayawa ta atomatik idan aka gamu da matsala, Tsarin ƙira mai ma'ana. Ƙara aikin ɗaukar nauyi na kai don injin don ƙara kwanciyar hankali na aiki.

Tsarin alamar iska wanda kuma zai iya yin alama akan hanyoyin haɗi guda biyu a lokaci guda.
5: MAGANIN ZAFI: An yi wa dukkan sarkar magani da zafi mai matsakaicin mita, an taurare ta daga zafin da ke sama da wurin AC3 sannan aka rage ta kafin a yi mata aiki da ƙarfin hana ƙera ta. Yanayin dakatarwa ya yi tasiri aƙalla kamar zafin 400°C da aka kiyaye na tsawon awa 1. Lokacin da aka gabatar da shawarar tabbatarwa, an gwada sarkar samfurin bayan an sake dumama su kuma an kiyaye su na tsawon awa 1 a 400°C sannan a sanyaya su zuwa zafin ɗaki. (AS 2321:2014 ta buƙaci a rage sarkar a zafin jiki aƙalla 200°C don V200 da 380°C don V400).