Majajjawar Sarkar G100 Alloy Karfe 1 ƙafa/2 ƙafa/3 ƙafa/4 En818-4

• Bayanin Samfurin

TheSarkar sarkar G100wani nau'in kayan ɗagawa ne da aka saba amfani da shi a masana'antu masu nauyi don ɗaukar kaya masu nauyi. Aikinsa ya fi G80 girma da kashi 25%. An san shi da ƙarfinsa mai girma, juriya, da kuma ikon jure wa mawuyacin yanayi na aiki.

Sunan "G100" yana nufin matakin ƙarfen ƙarfe da aka yi amfani da shi wajen gina sarkar. Ana ƙera sarƙoƙin G100 da ƙarfe mai ƙarfi wanda ke da ƙarfin jurewa mai yawa da kuma juriya mai kyau ga lalacewa, gajiya, da tasiri. Wannan yana sa su dace da ɗaukar kaya masu nauyi kuma yana tabbatar da tsawon rai.

Ana haɗa sarƙoƙin sarƙoƙi da sassa daban-daban, ciki har da hanyoyin haɗin sarƙoƙi, hanyoyin haɗin farko, ƙugiya, da sauran kayan haɗi. Waɗannan sassan suna da haɗin kai sosai don samar da tsarin ɗagawa mai sassauƙa da aminci. An ƙera sarƙoƙin G100 musamman don magance ayyukan ɗagawa masu wahala kuma ana iya amfani da su a cikin tsare-tsare daban-daban kamar maƙallan ƙafa ɗaya, biyu, uku, ko huɗu.

• Bayani dalla-dalla:

Lambar Samfura: Majajjawar Sarkar Ɗagawa ta G100

• Gargaɗi:

Kada a taɓa amfani da yawan wuce gona da iri.

Lokacin amfani da majajjawar sarkar G100, yana da mahimmanci a bi ingantattun hanyoyin ɗagawa da kuma bin ƙa'idodin aminci. Dubawa da kula da majajjawar akai-akai yana da mahimmanci don tabbatar da ci gaba da aiki lafiya da aminci.

• Aikace-aikace:

• Tsarin & Marufi

1:KIRKIRO: Ana buƙatar duba siffar mahaɗi da kuma lambar V a lokacin cikakken aikin. Ana buƙatar duba girma.

2: WALDA: An samar da walda ta amfani da hanyoyin juriya kuma an sanya ta a tsakiyar ƙafa ɗaya ta mahaɗin. An gama ta da kyau a ko'ina. Haɗin da walda ba za su nuna tsagewa, ƙusoshi ko wasu lahani makamancin haka waɗanda ke cutar da sarkar ba bayan an haɗa ta. Diamater na kayan da ke wurin walda bai wuce buƙatun girma ba kuma bai wuce diamita na kayan mahaɗin ba. Don sarkar walda mai santsi, za a cire fin da walda ta haifar kuma walda za ta ƙare da kyau a ko'ina. Matsayin walda a tsakiyar ganga madaidaiciya da kuma juriyar da aka sanya akan fitowar walda zai samar da izinin da ake buƙata.

3: KYAUTA: Ana buƙatar duba girma don kowane daidaitawa. Dole ne a rubuta tabbacin nauyin daidaitawa ga kowane rukuni.

4:ALAMA: Injin Daidaita Sarka. Jerin ja yana samuwa don alamar/tambari daga diamita na sarka 5mm zuwa 16mm. Farawa ɗaya maɓalli. Ɗauki tsarin sarrafawa na PCC tare da aikin tsayawa ta atomatik idan aka gamu da matsala, Tsarin ƙira mai ma'ana. Ƙara aikin ɗaukar nauyi na kai don injin don ƙara kwanciyar hankali na aiki.

Tsarin alamar iska wanda kuma zai iya yin alama akan hanyoyin haɗi guda biyu a lokaci guda.
5: MAGANIN ZAFI: An yi wa dukkan sarkar magani da zafi mai matsakaicin mita, an taurare ta daga zafin da ya wuce wurin AC3 sannan aka rage mata zafi kafin a yi mata gwajin ƙarfin ƙera ta.